MoreBeer! Pro brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by the MoreBeer! Pro one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume.
The 1 & 2 bbl Pro Brites feature a single shell design, sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons.
Please note: these units do not have a built-in cooling jacket and are intended to be used in a walk-in cold room for temperature control.
Features Include:
-
304 stainless steel construction
-
True domed top and bottom
-
Full length site gauge with sediment trap
-
Pressure/Vacuum relief valve 1 Bar / 15 PSI
-
Carbonation stone
-
Sealed pressure gauge
-
Analog temperature gauge
-
Sample valve
-
Center bottom tri-clamp drain
-
Top vent/CO2 port with butterfly valve
-
Pt100 Thermocouple interface
Specifications:
-
Grade 304 Stainless Steel
-
2mm thick single shell design
-
Internal Finish: #2B
-
Tank Height w/ Blowoff Pipe: 47"
-
Tank Diameter w/ Fittings: 28"
-
Empty Weight: 100 lbs
-
Working Volume: 1 bbl
-
Max Volume: 1.2 bbl
-
Working Pressure: 1 Bar (14.5)
-
All ports are 1.5" TC except 10" TC Dome Port and 4" TC Hopping Port
Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
| Item # |
CON4201 |
| Weight |
100
LBS
|
